Issue with connecting from client

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
ciph
Posts: 3
Joined: Thu Dec 05, 2013 4:17 pm

Issue with connecting from client

Post by ciph » Thu Dec 05, 2013 4:30 pm

Hello
I have a issue with one of my SE VPN servers. Both client and server is on the same network (connected to the same router). When I am trying to connect I get these errors, on initial connection: http://i.imgur.com/7RUrStR.jpg after two seconds: http://i.imgur.com/BDpuBHw.jpg.

Logs are telling me this:
2013-12-05 17:23:36.213 Connection "CID-20" terminated by the cause "The VPN session was deleted. It is possible that either the administrator disconnected the session or the connection from the client to the VPN Server was disconnected." (code 11).
2013-12-05 17:23:36.213 Connection "CID-20" was terminated.
2013-12-05 17:23:37.641 Connection "CID-21" terminated by the cause "Time-out occurred during VPN session communication. It is possible the connection from the client to the VPN Server was disconnected." (code 13).

Any help would be extremly appreciated. Oh and just a side note, I have set up 3 other servers with SoftEther and they are working perfect. I have tried everything on defaults and then configure it as I want it to be, nothing seem to work. The big difference is that this server is on a Raspberry Pi, using softether-vpnserver-v2.00-9387-rtm-2013.09.16-linux-arm_eabi-32bit.tar.gz.

Edit: Just because I wrote here I got it working. I am using CSF Firewall, tried to do csf -x (disable firewall), then connections started working. I still need help though, which ports are used? I current have opened up TCP 443, 1194, 992 and 5555.

Post Reply