I am using the latest Softether VPN Client software installed on Windows 10 laptop. I configured the software and created the VPN client adapter as per the manual. I am unable to get connection within Windows 10 on the laptop. When I look at device status on the laptop it shows VPN client with the message "network cable not plugged in " The cable is plugged in and functioning with my NIC on the laptop.
Any suggestions would be appreciated.
Thanks, Bob
VPN Client will not connect on Windows 10 laptop
-
kn4hh
- Posts: 11
- Joined: Thu Mar 03, 2016 9:01 pm
-
maltyx
- Posts: 65
- Joined: Wed Feb 25, 2015 6:53 am
Re: VPN Client will not connect on Windows 10 laptop
Its probably fails to get connected to a VPN server .. I would start from check logs on the server side ..
-
kn4hh
- Posts: 11
- Joined: Thu Mar 03, 2016 9:01 pm
Re: VPN Client will not connect on Windows 10 laptop
maltyx wrote:
> Its probably fails to get connected to a VPN server .. I would start from
> check logs on the server side ..
You are correct. I did not realize that the "Network cable unplugged" message does not go away until I connect to my host pc.
Thanks so much for your comments.
Regards, Bob
> Its probably fails to get connected to a VPN server .. I would start from
> check logs on the server side ..
You are correct. I did not realize that the "Network cable unplugged" message does not go away until I connect to my host pc.
Thanks so much for your comments.
Regards, Bob