Push routing table to client (CLI setup)
Posted: Thu Aug 04, 2016 6:39 am
Hi everybody.
First of all i want to express my gratitude to developers of this wonderful software! Your software is a great thing which makes VPN server setup very easy to do and works like a charm.
My question is about pushing routing table to client.
It would be perfect to add cherry on top of ther perfect working VPN cake in the form of transferring some routes to client.
When client connects to VPN server whole traffic is transfered through it. I need to make it to transfer trafic for some particular IPs in Internet.
DhcpGet command responses with
Item |Value
-------------------------------+--------------
Use Virtual DHCP Function |Yes
Start Distribution Address Band|192.168.30.10
End Distribution Address Band |192.168.30.200
Subnet Mask |255.255.255.0
Lease Limit (Seconds) |7200
Default Gateway Address |192.168.30.1
DNS Server Address 1 |192.168.30.1
DNS Server Address 2 |None
Domain Name |
Save NAT and DHCP Operation Log|Yes
Static Routing Table to Push |
So, as i think, i need to add Static Routing Table to Push.
But i can't understand which command in CLI is used for it. DhcpSet doesn't ask anything it about.
First of all i want to express my gratitude to developers of this wonderful software! Your software is a great thing which makes VPN server setup very easy to do and works like a charm.
My question is about pushing routing table to client.
It would be perfect to add cherry on top of ther perfect working VPN cake in the form of transferring some routes to client.
When client connects to VPN server whole traffic is transfered through it. I need to make it to transfer trafic for some particular IPs in Internet.
DhcpGet command responses with
Item |Value
-------------------------------+--------------
Use Virtual DHCP Function |Yes
Start Distribution Address Band|192.168.30.10
End Distribution Address Band |192.168.30.200
Subnet Mask |255.255.255.0
Lease Limit (Seconds) |7200
Default Gateway Address |192.168.30.1
DNS Server Address 1 |192.168.30.1
DNS Server Address 2 |None
Domain Name |
Save NAT and DHCP Operation Log|Yes
Static Routing Table to Push |
So, as i think, i need to add Static Routing Table to Push.
But i can't understand which command in CLI is used for it. DhcpSet doesn't ask anything it about.