Hi,
I have done setup of soft-ether server on RHEL7.2.
When I am connecting soft-ether client from windows 8.1, it's getting connected and DHCP allocates virtual IP.
When I am connecting soft-ether client from other RHEL7 machine, DHCP is not able to get virtual IP.
It shows connected when executing accountinfo command,
Is there any configuration that i'm missing for DHCP server ?
Regards,
Mehul
Virtual IP address is not getting allocated from DHCP
-
- Posts: 9
- Joined: Tue Jan 03, 2017 12:45 pm
Virtual IP address is not getting allocated from DHCP
You do not have the required permissions to view the files attached to this post.
-
- Posts: 336
- Joined: Sat Aug 15, 2015 7:41 pm
Re: Virtual IP address is not getting allocated from DHCP
Are you using SecureNAT or a bridge?
Which VPN protocol are you using to connect?
Which VPN protocol are you using to connect?
-
- Posts: 9
- Joined: Tue Jan 03, 2017 12:45 pm
Re: Virtual IP address is not getting allocated from DHCP
After enabling secure NAT, DHCP assigns IP to softether client. e.g. 192.168.30.10
But, I am not able to ping softether client IP from softether server on windows.
Firewall is disabled and I have enabled Local bridging.
But, I am not able to ping softether client IP from softether server on windows.
Firewall is disabled and I have enabled Local bridging.
-
- Posts: 336
- Joined: Sat Aug 15, 2015 7:41 pm
Re: Virtual IP address is not getting allocated from DHCP
What is the IP of the client? is it in the same subnet as the server?
-
- Posts: 9
- Joined: Tue Jan 03, 2017 12:45 pm
Re: Virtual IP address is not getting allocated from DHCP
No.
IP of Soft-ether Server: 192.168.6.169
IP address allocated to client by DHCP: 192.168.30.10 (When enabling Secure NAT and DHCP)
IP of Soft-ether Server: 192.168.6.169
IP address allocated to client by DHCP: 192.168.30.10 (When enabling Secure NAT and DHCP)
-
- Posts: 2458
- Joined: Mon Feb 24, 2014 11:03 am
Re: Virtual IP address is not getting allocated from DHCP
Assigning IP address is responsibility of client OS.
Please configure network setting for DHCP or run dhclient manually.
Please configure network setting for DHCP or run dhclient manually.
-
- Posts: 9
- Joined: Tue Jan 03, 2017 12:45 pm
Re: Virtual IP address is not getting allocated from DHCP
@thisjun
After running
$ dhclient tap_soft
command on server, it gets new IP address in the range which is defined in virtual DHCP configuration of soft-ether.
Thanks,
Mehul
After running
$ dhclient tap_soft
command on server, it gets new IP address in the range which is defined in virtual DHCP configuration of soft-ether.
Thanks,
Mehul