Problem with split tunneling

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
bardossya
Posts: 4
Joined: Wed Feb 08, 2017 4:37 pm

Problem with split tunneling

Post by bardossya » Wed Feb 08, 2017 4:49 pm

Hello,

my name is Adrian and I need your help. I was configuring DHCP option 121 on softether VPN system. Previously, I have configured here the bridge.

Problem is I cannot see nothing in log and I cannot push those classless static routes via this bridge to local router. Can you help me with this issue. It was configured on Ubuntu.

Best regards,
Adrian Bardossy

moatazelmasry
Posts: 336
Joined: Sat Aug 15, 2015 7:41 pm

Re: Problem with split tunneling

Post by moatazelmasry » Wed Feb 08, 2017 7:56 pm

Could you please provide more details about your setup.
Where is SE installed, what is the gateway and subnet. SecureNAT or local bridge. Which network are you trying to reach etc..

bardossya
Posts: 4
Joined: Wed Feb 08, 2017 4:37 pm

Re: Problem with split tunneling

Post by bardossya » Fri Feb 10, 2017 3:04 pm

Hello,

it should work like this.

User will connect to SSTP VPN located on ubuntu server with softether service.
After that client will have IP address 10.0.1.x/24 and using gatewaz on local router on 192.168.1.0/24 subnet.
After whole configuration and selinux located in default location, user cannot obtain routes with DHCPoption 121.

I hope those details will help you to solve my problem.

Thank you.
Adrian

bardossya
Posts: 4
Joined: Wed Feb 08, 2017 4:37 pm

Re: Problem with split tunneling

Post by bardossya » Fri Feb 10, 2017 3:09 pm

Sorry for dividing it to 2 mesaages, rputes can be pushed to linux station but to windows stations they cannot be pushed.

Thanks.

bardossya
Posts: 4
Joined: Wed Feb 08, 2017 4:37 pm

Re: Problem with split tunneling

Post by bardossya » Wed Feb 15, 2017 8:56 am

Hello,

so the progress is here:

I have configured split tunneling on interface br0
When I have configured here dhcp server, routes can be pushed to linux station, but not to windows station
I have configured some extra routes on softether, the routes are pushed to linux station, not to windows station.

Can you help me how to troubleshoot this?

Thanks.

tschmidty
Posts: 2
Joined: Wed Feb 15, 2017 2:21 pm

Re: Problem with split tunneling

Post by tschmidty » Wed Feb 15, 2017 3:53 pm

Are you using secure nat or the local bridge. As in, are you using the SoftEther DHCP server or a DHCP server on your network?

thisjun
Posts: 2458
Joined: Mon Feb 24, 2014 11:03 am

Re: Problem with split tunneling

Post by thisjun » Thu Mar 02, 2017 6:34 am

Did you also use SSTP on Linux?

Post Reply