Page 1 of 1
Howto dynamically assign Public IP in Windows
Posted: Sat Apr 22, 2017 11:07 am
by aboka
hi, we like to ask how could we dynamically assign unuse Public IPs to VPN client on Windows platform? we have read the Virtual DHCP, but it did not mention about Public IPs.
Thank you,
Re: Howto dynamically assign Public IP in Windows
Posted: Tue May 09, 2017 10:23 am
by colapig
are you sure if your computer can running with public when the compter connect to the vpn server?
Re: Howto dynamically assign Public IP in Windows
Posted: Mon May 15, 2017 4:14 pm
by aboka
colapig wrote:
> are you sure if your computer can running with public when the compter
> connect to the vpn server?
hi, sorry just notice your reply. what we mean is SE will assign the public IP according to the private IP they are getting. for eg-
10.0.0.101 -> publicIP1
10.0.0.102 -> publicIP2
.
.
.
or is this a feature we need to set in networking/DNS? pls advice.
thank you,
Re: Howto dynamically assign Public IP in Windows
Posted: Tue May 16, 2017 7:12 am
by colapig
This is your DHCP server function. VPN server doesn't handle IP obtain issue.
Re: Howto dynamically assign Public IP in Windows
Posted: Thu May 18, 2017 8:11 am
by aboka
colapig wrote:
> This is your DHCP server function. VPN server doesn't handle IP obtain
> issue.
hi, so you mean this 'feature' is not inside SE but DHCP. would it be possible to accomplish this with Virtual DHCP in SE?
thanks,