Cascade connection - "Encryption: Disabled"
-
- Posts: 16
- Joined: Sat May 13, 2017 6:39 pm
Cascade connection - "Encryption: Disabled"
Hello!
Is this the correct state of the bridge? So it should be?
(CentOS 7.2)
VPN Server/BRIDGE>sessionget sid-link-2
SessionGet command - Get Session Information
Item |Value
-----------------------------------------------+----------------------------------------
User Name (Authentication) |Cascade
VLAN ID |-
Server Product Name |SoftEther VPN Bridge (64 bit)
Server Version |4.22
Server Build |Build 9634
Connection Started at |2017-05-13 (Sat) 14:17:38
First Session has been Established since |2017-05-13 (Sat) 14:17:38
Current Session has been Established since |2017-05-13 (Sat) 14:17:38
Half Duplex TCP Connection Mode |No (Full Duplex Mode)
VoIP / QoS Function |Enabled
Number of TCP Connections |0
Maximum Number of TCP Connections |0
###
Encryption |Disabled (No Encryption)
###
Use of Compression |No (No Compression)
UDP Acceleration is Supported |No
UDP Acceleration is Active |No
Session Name |SID-LINK-2
VPN Server/VPNL2>sessionget sid-admin-2
SessionGet command - Get Session Information
Item |Value
------------------------------------------+----------------------------------------
Client IP Address |10.0.2.16
Client Host Name |10.0.2.16
User Name (Authentication) |admin
User Name (Database) |admin
VLAN ID |-
Server Product Name |SoftEther VPN Server (64 bit)
Server Version |4.22
Server Build |Build 9634
Connection Started at |2017-05-13 (Sat) 14:17:38
First Session has been Established since |2017-05-13 (Sat) 14:17:38
Current Session has been Established since|2017-05-13 (Sat) 14:17:38
Half Duplex TCP Connection Mode |No (Full Duplex Mode)
VoIP / QoS Function |Enabled
Number of TCP Connections |8
Maximum Number of TCP Connections |8
###
Encryption |Enabled (Algorithm: AES256-SHA)
###
Use of Compression |No (No Compression)
Physical Underlay Protocol |Standard TCP/IP (IPv4)
UDP Acceleration is Supported |No
UDP Acceleration is Active |No
Session Name |SID-ADMIN-2
Is this the correct state of the bridge? So it should be?
(CentOS 7.2)
VPN Server/BRIDGE>sessionget sid-link-2
SessionGet command - Get Session Information
Item |Value
-----------------------------------------------+----------------------------------------
User Name (Authentication) |Cascade
VLAN ID |-
Server Product Name |SoftEther VPN Bridge (64 bit)
Server Version |4.22
Server Build |Build 9634
Connection Started at |2017-05-13 (Sat) 14:17:38
First Session has been Established since |2017-05-13 (Sat) 14:17:38
Current Session has been Established since |2017-05-13 (Sat) 14:17:38
Half Duplex TCP Connection Mode |No (Full Duplex Mode)
VoIP / QoS Function |Enabled
Number of TCP Connections |0
Maximum Number of TCP Connections |0
###
Encryption |Disabled (No Encryption)
###
Use of Compression |No (No Compression)
UDP Acceleration is Supported |No
UDP Acceleration is Active |No
Session Name |SID-LINK-2
VPN Server/VPNL2>sessionget sid-admin-2
SessionGet command - Get Session Information
Item |Value
------------------------------------------+----------------------------------------
Client IP Address |10.0.2.16
Client Host Name |10.0.2.16
User Name (Authentication) |admin
User Name (Database) |admin
VLAN ID |-
Server Product Name |SoftEther VPN Server (64 bit)
Server Version |4.22
Server Build |Build 9634
Connection Started at |2017-05-13 (Sat) 14:17:38
First Session has been Established since |2017-05-13 (Sat) 14:17:38
Current Session has been Established since|2017-05-13 (Sat) 14:17:38
Half Duplex TCP Connection Mode |No (Full Duplex Mode)
VoIP / QoS Function |Enabled
Number of TCP Connections |8
Maximum Number of TCP Connections |8
###
Encryption |Enabled (Algorithm: AES256-SHA)
###
Use of Compression |No (No Compression)
Physical Underlay Protocol |Standard TCP/IP (IPv4)
UDP Acceleration is Supported |No
UDP Acceleration is Active |No
Session Name |SID-ADMIN-2
-
- Posts: 16
- Joined: Sat May 13, 2017 6:39 pm
Re: Cascade connection - "Encryption: Disabled"
Hey guys, can you explain to me whether this is a problem or not?
Thanks.
Thanks.
-
- Posts: 2458
- Joined: Mon Feb 24, 2014 11:03 am
Re: Cascade connection - "Encryption: Disabled"
If destination of cascade is localhost, encryption isn't used for.
-
- Posts: 16
- Joined: Sat May 13, 2017 6:39 pm
Re: Cascade connection - "Encryption: Disabled"
If the connection is from the server side?
vpnsrv(10.0.2.15) <----> vpnbr(10.0.2.16)
[root@vpnsrv vpnserver]# ./vpncmd
...
...
Hostname of IP Address of Destination: 10.0.2.16:443
...
...
VPN Server/BRIDGE>sessionget sid-link-3
...
...
Encryption | Disabled (No Encryption)
vpnsrv(10.0.2.15) <----> vpnbr(10.0.2.16)
[root@vpnsrv vpnserver]# ./vpncmd
...
...
Hostname of IP Address of Destination: 10.0.2.16:443
...
...
VPN Server/BRIDGE>sessionget sid-link-3
...
...
Encryption | Disabled (No Encryption)
-
- Posts: 2458
- Joined: Mon Feb 24, 2014 11:03 am
Re: Cascade connection - "Encryption: Disabled"
Are these hosts clone?
If host identity are same, SoftEther VPN recognize destination is localhost.
If host identity are same, SoftEther VPN recognize destination is localhost.
-
- Posts: 16
- Joined: Sat May 13, 2017 6:39 pm
Re: Cascade connection - "Encryption: Disabled"
Initially I tested in a virtualbox on Mac. VMs were clones.
After that I tested it in vmware. Virtual machines are located on two hosts:
hostesxi1 and hostesxi2.
Result as in the previous post:
####
...
VPN Server/BRIDGE>sessionget sid-link-...
...
...
Encryption | Disabled (No Encryption)
####
On the vpnbridge I done the following settings:
hub BRIDGE
CascadeCreate ...
CascadePasswordSet ...
CascadeOnline ...
After that I tested it in vmware. Virtual machines are located on two hosts:
hostesxi1 and hostesxi2.
Result as in the previous post:
####
...
VPN Server/BRIDGE>sessionget sid-link-...
...
...
Encryption | Disabled (No Encryption)
####
On the vpnbridge I done the following settings:
hub BRIDGE
CascadeCreate ...
CascadePasswordSet ...
CascadeOnline ...
-
- Posts: 2458
- Joined: Mon Feb 24, 2014 11:03 am
Re: Cascade connection - "Encryption: Disabled"
Please try to change host name of guest on the VM.
-
- Posts: 16
- Joined: Sat May 13, 2017 6:39 pm
Re: Cascade connection - "Encryption: Disabled"
I changed the names of all VM hosts. Installed VM on hosts KVM and ESXi.
-
- Posts: 2458
- Joined: Mon Feb 24, 2014 11:03 am
Re: Cascade connection - "Encryption: Disabled"
Could you share the result?
-
- Posts: 16
- Joined: Sat May 13, 2017 6:39 pm
Re: Cascade connection - "Encryption: Disabled"
Here are the logs and the connection diagram
You do not have the required permissions to view the files attached to this post.
-
- Posts: 2458
- Joined: Mon Feb 24, 2014 11:03 am
Re: Cascade connection - "Encryption: Disabled"
"SessionGet" command is showing status of session between virtual cascade device and virtual hub.
This is meaningless.
Please check status by "CascadeStatusGet" command.
This is meaningless.
Please check status by "CascadeStatusGet" command.
-
- Posts: 16
- Joined: Sat May 13, 2017 6:39 pm
Re: Cascade connection - "Encryption: Disabled"
Thank you!
A few more questions:
1. Will the MakeCert4096 command be added to one of the following versions?
2. Can I add /SetPassphrase to the MakeCert?
A few more questions:
1. Will the MakeCert4096 command be added to one of the following versions?
2. Can I add /SetPassphrase to the MakeCert?