connected to server but can't browsing

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
cat
Posts: 5
Joined: Sat Mar 16, 2013 10:12 am

connected to server but can't browsing

Post by cat » Sat Mar 16, 2013 10:20 am

Hi

i've made vpn server with softether vpn on debian 32bit.
client (my comp) is win 7 64 bit.
It succesfully connected, but after connected can't browsing. Ping is working normally.
Any advice? TIA.

cedar
Site Admin
Posts: 1837
Joined: Sat Mar 09, 2013 5:37 am

Re: connected to server but can't browsing

Post by cedar » Sun Mar 17, 2013 3:33 am

What did you want to browse?

If you want to browse the VPN server's host PC, you should use tap mode local-bridge.

cat
Posts: 5
Joined: Sat Mar 16, 2013 10:12 am

Re: connected to server but can't browsing

Post by cat » Sun Mar 17, 2013 4:45 am

cedar wrote:
> What did you want to browse?
>
> If you want to browse the VPN server's host PC, you should use tap mode
> local-bridge.

I want to browse internet (ex youtube.com). I connect it on wifi that only allow icmp packet (i hope can bypass it with softether). VPN over ICMP is enable on my server. It successfully connected but still can't browse internet.

cedar
Site Admin
Posts: 1837
Joined: Sat Mar 09, 2013 5:37 am

Re: connected to server but can't browsing

Post by cedar » Sun Mar 17, 2013 12:48 pm

Your client's virtual NIC have been assigned a proper IP address?
If you don't have DHCP server in your server's segment, you can use also a virtual DHCP server function.

cat
Posts: 5
Joined: Sat Mar 16, 2013 10:12 am

Re: connected to server but can't browsing

Post by cat » Mon Mar 18, 2013 1:31 am

cedar wrote:
> Your client's virtual NIC have been assigned a proper IP address?
> If you don't have DHCP server in your server's segment, you can use also a
> virtual DHCP server function.

I thought it assigned proper IP address & DHCP server it's enable. Please see screenshot below & in attachment, maybe you can find the problem. Thank you.

http://postimage.org/image/vuqth0x1t/
You do not have the required permissions to view the files attached to this post.

cedar
Site Admin
Posts: 1837
Joined: Sat Mar 09, 2013 5:37 am

Re: connected to server but can't browsing

Post by cedar » Mon Mar 18, 2013 2:25 am

VPN client don't manage the virtual NIC's IP address.
Please check IP address in 'Network Connections' of the control-panel instead of VPN client.

cat
Posts: 5
Joined: Sat Mar 16, 2013 10:12 am

Re: connected to server but can't browsing

Post by cat » Mon Mar 18, 2013 2:58 am

cedar wrote:
> VPN client don't manage the virtual NIC's IP address.
> Please check IP address in 'Network Connections' of the control-panel
> instead of VPN client.

attached is from Control Panel\All Control Panel Items\Network and Sharing Center

what should i do so VPN client can manage the virtual NIC's IP address ?
You do not have the required permissions to view the files attached to this post.

cedar
Site Admin
Posts: 1837
Joined: Sat Mar 09, 2013 5:37 am

Re: connected to server but can't browsing

Post by cedar » Mon Mar 18, 2013 4:18 am

There is nothing to do on VPN client.

It seems that the virtual NIC didn't get an IP address from DHCP server.
Is there any DHCP server on servers side network?

If you don't have DHCP server, please enable virtual DHCP server function on the virtual hub.

cat
Posts: 5
Joined: Sat Mar 16, 2013 10:12 am

Re: connected to server but can't browsing

Post by cat » Mon Mar 18, 2013 6:15 am

>
> i've enabled SecureNat & now problem solved. Thanks for your help. Great software
> :D.


That's me. Forgot to login lol :p

Post Reply