Local Bridge on MS Hyper-V

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
Mahdi
Posts: 5
Joined: Wed Apr 03, 2013 9:51 pm

Local Bridge on MS Hyper-V

Post by Mahdi » Sat Apr 06, 2013 12:12 am

Hi all

At the moment the VPN server is running on a VPS in a Hyper-V cloud. It seems that I can create a local bridge such that after creation it statues becomes "operating" however there is not any bridge connection in "network connections" and the command "netsh bridge show adapter" returns nothing, In fact the only available connection is the original "local area connection". Therefore the clients cannot pass their traffic via the bridge while there is a session for the bridge in virtual hub. (DHCP is running on the virtual HUB )

cedar
Site Admin
Posts: 2070
Joined: Sat Mar 09, 2013 5:37 am

Re: Local Bridge on MS Hyper-V

Post by cedar » Sat Apr 06, 2013 3:23 pm

Local bridge function of VPN Server is different thing from Windows bridging function.

Please try to set MAC spoofing enable on your Hyper-V server.
http://blogs.technet.com/b/jhoward/arch ... ofing.aspx

YeMojuD
Posts: 4
Joined: Sun Apr 14, 2013 5:38 am

Re: Local Bridge on MS Hyper-V

Post by YeMojuD » Sun Apr 14, 2013 4:52 pm

I have same problem with Windows 2008 VPS (VMware ESX).
How can solve it?

cedar
Site Admin
Posts: 2070
Joined: Sat Mar 09, 2013 5:37 am

Re: Local Bridge on MS Hyper-V

Post by cedar » Tue Apr 16, 2013 2:28 am

This setting is called as 'promiscuous mode' in VMware.

http://2.bp.blogspot.com/-qMnMUUtg7No/U ... scuous.png

YeMojuD
Posts: 4
Joined: Sun Apr 14, 2013 5:38 am

Re: Local Bridge on MS Hyper-V

Post by YeMojuD » Wed Apr 24, 2013 5:35 am

cedar wrote:
> This setting is called as 'promiscuous mode' in VMware.
>
>
> http://2.bp.blogspot.com/-qMnMUUtg7No/U ... scuous.png

Thanks cedar

Now I get ip address after connect to VPS, but can't access internet.

cedar
Site Admin
Posts: 2070
Joined: Sat Mar 09, 2013 5:37 am

Re: Local Bridge on MS Hyper-V

Post by cedar » Wed Apr 24, 2013 6:48 am

If your client connect to the network of data-center, your client may be not assigned a proper IP address from data-center.
Please use virtual NAT instead of local-bridge in VPS.

YeMojuD
Posts: 4
Joined: Sun Apr 14, 2013 5:38 am

Re: Local Bridge on MS Hyper-V

Post by YeMojuD » Wed Apr 24, 2013 8:49 pm

Thanks, I test secure Virtual Nat and it's very slow!

Post Reply