remote IP address 1.0.0.1

gvsurenderreddy · Post by **gvsurenderreddy** » Tue Mar 04, 2014 1:35 pm

Hello I'm facing issue since many days i Cannot get remote IP address from the server its always 1.0.0.1 instead of 10.211.254.254 how can i send remote Ip address to client correct one

thank you

Post by **dnobori** » Thu Mar 06, 2014 6:22 am

That is not a problem. The IP address 1.0.0.1 is a dummy value on PPP negotiation phase. Please ignore it.

gvsurenderreddy · Post by **gvsurenderreddy** » Sun Mar 09, 2014 12:36 am

So how to add default route all my traffic is going thru local insterface rather than Point to point channel how can fix this please

Post by **dnobori** » Mon Mar 10, 2014 3:54 am

Which L2TP/VPN client are you using?

gvsurenderreddy · Post by **gvsurenderreddy** » Mon Mar 10, 2014 3:45 pm

SSTP-Client i'm using

Post by **dnobori** » Tue Mar 11, 2014 10:06 am

After you define the default gateway on the DHCP server in the L2 segment of the destination Virtual Hub, all SSTP-VPN clients can communicate any Internet hosts via SSTP tunnel.

gvsurenderreddy · Post by **gvsurenderreddy** » Tue Mar 11, 2014 7:50 pm

I have configured sir its same result I have tried from vpngate.net servers for sstp the results are similar

Post by **dnobori** » Wed Mar 12, 2014 7:04 pm

Are you using SSTP client for non-Windows?

remote IP address 1.0.0.1

remote IP address 1.0.0.1

Re: remote IP address 1.0.0.1

Re: remote IP address 1.0.0.1

Re: remote IP address 1.0.0.1

Re: remote IP address 1.0.0.1

Re: remote IP address 1.0.0.1

Re: remote IP address 1.0.0.1

Re: remote IP address 1.0.0.1