Add client routes from Hub to Bridges
-
- Posts: 42
- Joined: Wed Mar 19, 2014 9:36 pm
Add client routes from Hub to Bridges
Hi,
is it possible to let manipulate the routing table for the bridge's host via a central setting in the Hub?
any ideas?
rgds.
Michael
is it possible to let manipulate the routing table for the bridge's host via a central setting in the Hub?
any ideas?
rgds.
Michael
-
- Posts: 370
- Joined: Fri Oct 18, 2013 8:15 am
- Location: All around the world
- Contact:
Re: Add client routes from Hub to Bridges
Hi!
> is it possible to let manipulate the routing table for the bridge's host
> via a central setting in the Hub?
Could you provide more details or an example?
> is it possible to let manipulate the routing table for the bridge's host
> via a central setting in the Hub?
Could you provide more details or an example?
When you don't like the answer, change the question.
Cheers,
Team.
VPNHPanel.com
This account is not associated to SoftEther project.
Cheers,
Team.
VPNHPanel.com
This account is not associated to SoftEther project.
-
- Posts: 42
- Joined: Wed Mar 19, 2014 9:36 pm
Re: Add client routes from Hub to Bridges
Sure,
if a VPNClient is used its possible to propagate routing entries that are entered in the clients route table after the vpn connection is established.
I need to same just for bridges, but as the bridge does not receive a IP via DHCP this is not possible this way in my eyes.
hope its clear what I mean.
rgds.
Michael
if a VPNClient is used its possible to propagate routing entries that are entered in the clients route table after the vpn connection is established.
I need to same just for bridges, but as the bridge does not receive a IP via DHCP this is not possible this way in my eyes.
hope its clear what I mean.
rgds.
Michael
-
- Posts: 370
- Joined: Fri Oct 18, 2013 8:15 am
- Location: All around the world
- Contact:
Re: Add client routes from Hub to Bridges
My opinion is you cannot do it by design http://www.softether.org/4-docs/2-howto ... Bridge_VPN
You might take a look at LAN-to-LAN VPN (Using L3 IP Routing) http://www.softether.org/4-docs/1-manua ... P_Routing)
Cheers!
You might take a look at LAN-to-LAN VPN (Using L3 IP Routing) http://www.softether.org/4-docs/1-manua ... P_Routing)
Cheers!
When you don't like the answer, change the question.
Cheers,
Team.
VPNHPanel.com
This account is not associated to SoftEther project.
Cheers,
Team.
VPNHPanel.com
This account is not associated to SoftEther project.
-
- Posts: 42
- Joined: Wed Mar 19, 2014 9:36 pm
Re: Add client routes from Hub to Bridges
Hi,
iam using a L3 switch. But the problem is, that in the clients there must be added routing entries manually to be able reach the other networks, and if we will use hundrets of hubs and servers its very hard to maintain this entries manually, so this is the reason I asked for a more central solution.
Theoretically it should be possible by the bridge daemon to add routes to the routing table.
iam using a L3 switch. But the problem is, that in the clients there must be added routing entries manually to be able reach the other networks, and if we will use hundrets of hubs and servers its very hard to maintain this entries manually, so this is the reason I asked for a more central solution.
Theoretically it should be possible by the bridge daemon to add routes to the routing table.
-
- Posts: 370
- Joined: Fri Oct 18, 2013 8:15 am
- Location: All around the world
- Contact:
Re: Add client routes from Hub to Bridges
... then why don't you just add those required routes to the clients depending of the hub?
-
- Posts: 42
- Joined: Wed Mar 19, 2014 9:36 pm
Re: Add client routes from Hub to Bridges
inten wrote:
> ... then why don't you just add those required routes to the clients
> depending of the hub?
because we have hundret of hubs, currently i do that already manually, but thats a stupid working.
> ... then why don't you just add those required routes to the clients
> depending of the hub?
because we have hundret of hubs, currently i do that already manually, but thats a stupid working.
-
- Posts: 370
- Joined: Fri Oct 18, 2013 8:15 am
- Location: All around the world
- Contact:
Re: Add client routes from Hub to Bridges
Looks like a bit of flame here... :) but I do not realize your concerns about doing your job; if you have hundreds of physical switches you have to do same job, this is normal. Just imagine how can you rule your routing tables among all hubs automatically?
I will tell you more, currently we have 320 hubs running on 32 servers and we rule them using special software that changes routing tables accordingly. But even now we HAVE TO fix those routes manually every time when someone wants dedicated hub.
I will tell you more, currently we have 320 hubs running on 32 servers and we rule them using special software that changes routing tables accordingly. But even now we HAVE TO fix those routes manually every time when someone wants dedicated hub.
-
- Posts: 42
- Joined: Wed Mar 19, 2014 9:36 pm
Re: Add client routes from Hub to Bridges
I completely understand that softether cant bring me away from all the work. this is totaly clear.
I think i need to tell you that all the servers I have use a default GW, that is not connected to Softether (I have no controll over that GW). This means i cannot reconfigure the default gateway and add the routes there..
That results in a need to add in *every* server in the whole network static routes to let the traffic for SE go to the right GW.
If now there is a possibility that a bridge can receive routing entries that are centrally configured in a hub and applies to the server where the bridge itself is installed this makes it easy to administrate and also the routes can changed even if there is no direct administrative access to the bridge server.
I know, that then if there are other servers sidebyside to the bridge the routing configuration cannot automatically changed here. But In my environment the most subnets just have one server (the bridge itself).
This means that in my scenario the whole routing could be administrated centrally without a need to login every day to all the servers and add a new route.
I also know there is a possibility to script things and make that also happen, but I think this is a great feature for SE.
I think i need to tell you that all the servers I have use a default GW, that is not connected to Softether (I have no controll over that GW). This means i cannot reconfigure the default gateway and add the routes there..
That results in a need to add in *every* server in the whole network static routes to let the traffic for SE go to the right GW.
If now there is a possibility that a bridge can receive routing entries that are centrally configured in a hub and applies to the server where the bridge itself is installed this makes it easy to administrate and also the routes can changed even if there is no direct administrative access to the bridge server.
I know, that then if there are other servers sidebyside to the bridge the routing configuration cannot automatically changed here. But In my environment the most subnets just have one server (the bridge itself).
This means that in my scenario the whole routing could be administrated centrally without a need to login every day to all the servers and add a new route.
I also know there is a possibility to script things and make that also happen, but I think this is a great feature for SE.