L3 switch problem

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
marjan
Posts: 8
Joined: Mon Apr 21, 2014 9:18 pm

L3 switch problem

Post by marjan » Mon Apr 21, 2014 9:45 pm

I have two hubs
-"DEFAULT" who is bridged to LAN with ip 192.168.0.0(255.255.255.0) and virtual interface ip 192.168.0.6
-"VPN3" not bridged with on user with active virtual dhcp 192.168.169.0(255.255.255.0) and virtual interface ip 192.168.169.10

routing table
network address / mask / gateway /metric
192.168.0.0 /255.255.255.0 / 192.168.0.6 1
192.168.169.0 /255.255.255.0 / 192.168.169.10 1

What is wrong with this configuration, because i can not access to DEFAULT from
user on VPN3.
Top
mesa57
Posts: 153
Joined: Fri Oct 11, 2013 4:00 pm
Location: Netherlands

Re: L3 switch problem

Post by mesa57 » Tue Apr 22, 2014 6:36 pm

You're client does not know the route to the 192.168.0.x subnet.
Top
marjan
Posts: 8
Joined: Mon Apr 21, 2014 9:18 pm

Re: L3 switch problem

Post by marjan » Wed Apr 23, 2014 2:34 am

Solution?
Top
mesa57
Posts: 153
Joined: Fri Oct 11, 2013 4:00 pm
Location: Netherlands

Re: L3 switch problem

Post by mesa57 » Wed Apr 23, 2014 8:09 am

You have to add a route on you're client.
Top
marjan
Posts: 8
Joined: Mon Apr 21, 2014 9:18 pm

Re: L3 switch problem

Post by marjan » Thu Apr 24, 2014 12:26 am

how to do that?
Top
Post Reply

Return to “SoftEther VPN General Discussion”