site to site vpn issues

[auntiepattykho]

Hi,
I want to connect two offices:

Site 1:
- Softether VPN Server(Installed) have single NIC Card with LAN IP 192.168.0.33
- Created a virutal hub, a user for that hub and Locally bridged to NIC card.

Site 2:
- Softether VPN Server/Bridge(Installed) have single NIC Card with LAN IP 192.168.10.212
- Virtual Hub "BRIDGE" is bridged to the NIC card
- Cascaded connection to VPN Server and connection was established.

I am unable to ping other address from the other subnet from 1 site to the other. I am able to ping the gateway address of site 1 which is 192.168.0.1 but the rest of the ip address in the range it gives a destination unreachable.

Also pinging from site 1 to the site 2 gives a request time out. Can you shed some light on this? Attaching the sample server config.

[thisjun]

Please refer this topic.
http://www.vpnusers.com/viewtopic.php?f=7&t=3596

[auntiepattykho]

Hi thisjun,

Have followed the steps provided but still no go. I am only able to ping the interface which is assigned to the same subnet on the remote site when I do the L3 switching, and it is only from the machine where the bridge /cascade connection was made and not on the entire network. Anything else that I need to do to have this working?

[thisjun]

Which way did you try?

[auntiepattykho]

Tried all the 3 methods indicated.

[thisjun]

Did you do these ways separately?

[auntiepattykho]

Tried doing this separately and tried doing 1 and 3 separately also but didnt work so I did it the same time but I still could not connect to the other remote clients and servers.

Did not do the number 2 as we need to be on a different subnet.

[thisjun]

For way No.1, your default gateway may not know route to far site.
Could you confirm your routing table configuration of default gateway router?