Page 1 of 1
[Bug Report]Cannot recognize Local USB Network Adapter
Posted: Fri May 20, 2016 3:18 pm
by cst_zf
I have three network adapter in my windows 10.
1. TPLink USB Network Adapter TL-WN822N
2. Virtual Machine Network Adapter
3. Relteck Network Adapter with my mainboard
However in bridgedevicelist, there are only 2&3 in list.
Re: [Bug Report]Cannot recognize Local USB Network Adapter
Posted: Fri May 20, 2016 3:22 pm
by UkrZilla
Re: [Bug Report]Cannot recognize Local USB Network Adapter
Posted: Sun May 22, 2016 1:09 pm
by cst_zf
UkrZilla wrote:
> It is not bug
>
> 3.6.6
>
>
https://www.softether.org/4-docs/1-manu ... al_Bridges
Should I set NoPromiscuousMode to true?
Re: [Bug Report]Cannot recognize Local USB Network Adapter
Posted: Mon May 23, 2016 9:47 am
by UkrZilla
I would reccomend you don't use local bridge for this net card and use VirtualNat.
In order to have access from VirtualNAT to server you can:
1. Connect from server to localhost
or
2. Disable Kernel mode NAT
Re: [Bug Report]Cannot recognize Local USB Network Adapter
Posted: Mon May 23, 2016 11:11 am
by cst_zf
UkrZilla wrote:
> I would reccomend you don't use local bridge for this net card and use
> VirtualNat.
> In order to have access from VirtualNAT to server you can:
>
> 1. Connect from server to localhost
> or
> 2. Disable Kernel mode NAT
thank you for your advice. I have little knowledge about VirtualNAT, let me start a quick learning, :-)