Page 1 of 1

3 Lan with hardware routers

Posted: Mon Aug 01, 2016 1:37 pm
by vizary
Hello

I have VM with SE server. 2 NIC on server (lan and wan). 1 vhub in SE with localbridge to lan nic.
I have 2 remote LAN with Kineetuc Giga III.

Server LAN1: 10.0.1.0/24 with DHCP (not build-in SE)
LAN2: 192.168.1.0/24
LAN3: 192.168.2.0/24

I connect to SE by L2TP clinets on giga (gigas get 10.0.1.56 and 57 IP from DHCP on SE lan) and add static route on every giga.

10.0.1.0/255.255.255.0/vpn interface
10.0.1.56/vpn interface

10.0.1.0/255.255.255.0/vpn interface
10.0.1.57/vpn interface

Now all PC in giga's lan can see SE's LAN and use resources hosted on SE (shares, webapps etc). All PC in giga's lan can ping PC coonected to SE by any vpn client (they have same ip like 10.0.1.0/24).

But SE server cant ping and use resources in giga's lan (2,3)
Both giga's lan PCs cant see PCs inside LAN 2,3

Where in SE i can write static routes to LAN 2.3
192.168.1.0/255.255.255.0/10.0.1.56
192.168.2.0/255.255.255.0/10.0.1.57

Or what wrong?

Re: 3 Lan with hardware routers

Posted: Fri Aug 19, 2016 7:52 am
by thisjun
I think Giga III do NAT on VPN interface.