Hi,
My version of SoftEtherVPN server is: softether-vpnserver-v4.32-9731-beta-2020.01.01-linux-x64-64bit.tar
The VPN is deployed in a centos7 environment
Note that the VPN local user account can normally complete the dial authentication, and normal communication
I created a dial-up user in the VPN and wanted to authenticate with RADIUS,Configuration is as follows:
My RADIUS server was built with Microsoft Windows 2019 NPS,Configuration is as follows:
.........
Now the problem is that I through VPN client, dialing RADIUS always authentication is not on, I do not know what is the situation?
Excuse me, everyone, is there any relevant deployment document for your reference?
Or whether the softetherVPN is compatible with windows2019 NPS radius
Are there any concerns about SoftetherVPN and windows2019 NPS radius configuration?
SoftetherVPN with windows2019 NPS radius configuration issues
-
- Posts: 5
- Joined: Fri Dec 27, 2019 3:51 pm
SoftetherVPN with windows2019 NPS radius configuration issues
You do not have the required permissions to view the files attached to this post.
-
- Posts: 5
- Joined: Fri Dec 27, 2019 3:51 pm
Re: SoftetherVPN with windows2019 NPS radius configuration issues
This is my topology:
You do not have the required permissions to view the files attached to this post.
-
- Posts: 12
- Joined: Sun Feb 16, 2020 12:58 am
Re: SoftetherVPN with windows2019 NPS radius configuration issues
Hi cscowx,
Thanks for your Diagram,
I have setup Bellow Infra
AD - 2012
SE-VPN Server - Windows 2012 R2
RADIUS Server - Windows 2012 R2
DHCP - Windows 2012 R2
Authentication - RADIUS ( * for all)
how to make sure that IP address is reserved in DHCP server and when client connect, only reserved IP should be given to end user.
in my case, when i am any one connect, all are gettign same IP address and if set policy not to have duplicate mac address and IP address then, one client is able to connect but others are not.
i am using Build in dialup connection in windows system to connect SSTP VPN.
Any help please
Thanks for your Diagram,
I have setup Bellow Infra
AD - 2012
SE-VPN Server - Windows 2012 R2
RADIUS Server - Windows 2012 R2
DHCP - Windows 2012 R2
Authentication - RADIUS ( * for all)
how to make sure that IP address is reserved in DHCP server and when client connect, only reserved IP should be given to end user.
in my case, when i am any one connect, all are gettign same IP address and if set policy not to have duplicate mac address and IP address then, one client is able to connect but others are not.
i am using Build in dialup connection in windows system to connect SSTP VPN.
Any help please