Hi i'm curently using SE with 2 networks, the wan network and other
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether fa:16:3e:6f:5f:b1 brd ff:ff:ff:ff:ff:ff
inet PUBLICCC/32 brd 51.210.186.91 scope global dynamic eth0
valid_lft 86150sec preferred_lft 86150sec
inet6 fe80::f816:3eff:fe6f:5fb1/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc pfifo_fast state UP group default qlen 1000
link/ether fa:16:3e:c6:9a:0a brd ff:ff:ff:ff:ff:ff
inet 10.0.10.42/16 brd 10.0.255.255 scope global eth1
valid_lft forever preferred_lft forever
inet6 fe80::f816:3eff:fec6:9a0a/64 scope link
valid_lft forever preferred_lft forever
I enabled secure nat
On my client when i ping 8.8.8.8 it's working but when i want ping 10.0.0.60
tcpdump :
18:14:44.665521 IP PUBLIC IP > 10.0.0.60: ICMP echo request, id 63836, seq 80, length 40
The public ip try to ping 10.0.0.60 and not masquerading with 10.0.10.42
What can i do ?