Hello team,
i would like some help if that possible
here is what i complished so far
1. I'm using an OVH cloud vps on a linux OS as the main softether vpn server
2. On my local site (SITE1) I'm using a windows 10 as a server manager and another pc as a bridge that cascading to a hub that I create on the server and the same configuration on the other site (SITE2).
Here is my configuration that i make so far
On The server side:
1. Virtual hubs :
1.1 for the virtual hub (SITE1)
* SECURENAT :Enabled
* ip address : 192.168.30.1/24
* DHCP range : 192.168.30.10/24 TO 200
* Lease time : 7200
* default Gateway : 192.168.30.1
* DNS server : 192.168.30.1
* MTU : 1500
* TCP session : 1800
* UDP session : 60
And for static route table to push i did add 192.168.40.0/255.255.255.0/192.168.30.254
1.2 for the virtual hub (SITE2)
* SECURENAT :Enabled
* ip address : 192.168.40.1/24
* DHCP range : 192.168.40.10/24 TO 200
* Lease time : 7200
* default Gateway : 192.168.40.1
* DNS server : 192.168.40.1
* MTU : 1500
* TCP session : 1800
* UDP session : 60
And for static route table to push i did add 192.168.30.0/255.255.255.0/192.168.40.254, 198.168.1.0/255.255.255.0/192.168.40.253
2. In Layer 3 switching setting i created one virtual layer 3 switch with two virtual interfaces for each virtual hub
* Virtual interface site 1 : 192.168.30.254/24
* Virtual interface site 2 : 192.168.40.254/24
with no routing table
3. for the local bridge setting i haven't add anything,
4. VPN azure is disable,
5. DDNS it enable,
6. IPsec / L2TP are enable
On the bridges side:
ON SITE1 :
1. Cascading :
On the bridge one virtual hub is created by default and i cascade from the virtual hub on bridge to the virtual hub that i create already on the server side
the configuration like this
* Setting name : site012hq
* Host name : SERVER IP
* Port number : 443
* virtual hub name : HQ
* user authentication : user created on the server site
The status is online
2. SECURENAT setting :
SECURENAT :Disabled
* ip address : 192.168.30.1/24
* DHCP range : 192.168.30.10/24 TO 200
* Lease time : 7200
* default Gateway : 192.168.30.1
* DNS server : 192.168.30.1
* MTU : 1500
* TCP session : 1800
* UDP session : 60
And for static route table to push i haven't add any static route table
3. LOCAL BRIDGE settings:
For the local bridge settings I add an usb network adapter and connect it to the internet, and the integrated adapter on the pc is connected from the pc to a switch POE and from that switch to the clients.
That all the configuration that i make i haven't add any port forward or static route on the router or the clients also on the firewall.
i think a least it should ping between two sites and i work for 1 day but sometimes i get ip address of my ISP not VPN IP i don't know why that happened and other problem is when the clients are connect to vpn i can't access to my local device like i can't access to my router or printer ... but when i activate SECURENAT on bridge i can access to it but the IP address i get ISP address.
I really need help.
Here is some pictures :
https://imgur.com/a/tNYnsAk
Thank you
REGRADS