Using VPN server tunnel to communicate with server itself
Posted: Tue May 17, 2022 6:30 am
Dear forum members,
I installed SoftEther and setup VPN server with SecureNAT, VirtualDHCP (192.168.30.0/24) successfully.
Ping from my client (192.168.30.10) to the VPN server (192.168.30.1) works fine.
But the VPN connection couldn't be used from the VPN server back to the client, for example a ping from the server (192.168.30.1) to the
client 192.168.30.10 is not successful.
I'm looking for a solution to tunnel eclipse debugging with pydev which needs the following setup:
client -> https://webserver using the same host/ip address as VPN server
server debugging should use VPN tunnel (192.168.30.1) and connect to -> port 5678 to client (192.168.30.10)
Is this setup possible with SoftEther?
If yes, what needs to be changed in the configuration to either get a seperate interface for the private subnet (192.168.30.0/24) or to use
the VPN tunnel backwards?
Thank you for your help.
Best regards
Christof
I installed SoftEther and setup VPN server with SecureNAT, VirtualDHCP (192.168.30.0/24) successfully.
Ping from my client (192.168.30.10) to the VPN server (192.168.30.1) works fine.
But the VPN connection couldn't be used from the VPN server back to the client, for example a ping from the server (192.168.30.1) to the
client 192.168.30.10 is not successful.
I'm looking for a solution to tunnel eclipse debugging with pydev which needs the following setup:
client -> https://webserver using the same host/ip address as VPN server
server debugging should use VPN tunnel (192.168.30.1) and connect to -> port 5678 to client (192.168.30.10)
Is this setup possible with SoftEther?
If yes, what needs to be changed in the configuration to either get a seperate interface for the private subnet (192.168.30.0/24) or to use
the VPN tunnel backwards?
Thank you for your help.
Best regards
Christof