Page 1 of 1
enable split tunneling IP range
Posted: Thu Mar 09, 2023 6:38 pm
by hpathum
Hi
I am using IPv4 and here are the subnet that i am currently using
Can I know how do I enable the split tunneling for specific IP range
192.168.1.0/24
192.168.2.0/24
192.168.5.0/24
192.168.6.0/24
Re: enable split tunneling IP range
Posted: Thu Mar 09, 2023 8:42 pm
by solo
It is done with static routing.
Re: enable split tunneling IP range
Posted: Fri Mar 10, 2023 5:44 am
by hpathum
How do I mention subnet? can you please explain
Re: enable split tunneling IP range
Posted: Fri Mar 10, 2023 8:30 am
by solo
It depends on what you have, please describe.
Re: enable split tunneling IP range
Posted: Fri Mar 10, 2023 5:53 pm
by hpathum
I want to enable split tunneling
but only for a few subnets
Please refer below subnets
192.168.1.0/24
192.168.2.0/24
192.168.5.0/24
192.168.6.0/24
Re: enable split tunneling IP range
Posted: Fri Mar 10, 2023 9:09 pm
by shakibamoshiri
You can use "Secure NAT" setting to add static routes to push to a client and tell the client to only "include" routes have been mentioned in "Secure NAT".
but
Including routes relies on clients to add/implement not on a server. So you may set it but see it that did not work. (try it anyway)
The other solution is in client side, "separate" any route or subnet you want. just exclude them before establishing a "full tunnel".
Re: enable split tunneling IP range
Posted: Sat Mar 11, 2023 10:04 pm
by solo
hpathum wrote: ↑Fri Mar 10, 2023 5:53 pm
Please refer below subnets ....
Yeah we know these already, describe context: OS, SecureNAT, LBS, L3.