SoftEther VPN User Forum

Dear All,

Without Secure NAT default gateway address, its not communicating local network on Azure, Attached screenshot. Please note that with gateway address its communicating but the public IP is changing. And other Cloud provider like AWS is working without Secure NAT default gateway address.

Please help me to resolve this issue.

You need a split tunnel.

Dear Solo,

Thank you for your prompt assistance. I've tried the solutions you suggested(https://www.vpnusers.com/viewtopic.php? ... 16&#p97816), but unfortunately, the issue persists. Could you please provide a step-by-step guide. I've attached a screenshot of my setup for your reference

Thank you,
Saifu

The 192.168... push mask appears incorrect.

Could you please advice push mask, below the network


eth0: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST> mtu 1500
inet 192.168.0.9 netmask 255.255.192.0 broadcast 192.168.63.255
inet6 fe80::6245:bdff:fe14:a7bd prefixlen 64 scopeid 0x20<link>
ether 60:45:bd:14:a7:bd txqueuelen 1000 (Ethernet)
RX packets 244819 bytes 64504978 (64.5 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 318426 bytes 89447810 (89.4 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 1 bytes 76 (76.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1 bytes 76 (76.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

The "inet 192.168.0.9 netmask 255.255.192.0 broadcast 192.168.63.255" config appears incorrect.

Its the config of Azure VM

Push this: 192.168.64.0/255.255.192.0/192.168.30.1

Dear Solo,

I just wanted to let you know that everything is working perfectly. Thank you so much for your help—it's truly appreciated!

Warm regards,
Saifu.