add automatically routing information

[mstenz]

Hi,

iam Using both VPN Server and VPN bridges to crossconnect (via L3 Switch) different Office networks. (for example 10.10.10.0 for users network, 10.10.11.0 for printers network and so on)
Additionall I enabled normal clients (windows client vpn software) to "dial" in to one of my virtual hubs.
After that was successfull a connection from the client to all devices in the same network (10.10.10.0) is possible.
I have configured no additional default gateway to the client. This means 0.0.0.0 gets routed via the default network card from the clients device.
How iam able to let automatically add all the other routes from the L3 switch added to the clients routing table?

help much appreciated.
thx.
rgds.
Michael

[dnobori]

Hi,

Use the split-tunneling function, added on the Build 9430.
You can configure the routing table to push to client, on the setting screen of the SecureNAT DHCP Server.
http://www.softether.org/5-download/history

[mstenz]

thx, this is really great. I will test that out directly.

[parkycai]

THX for the split-tunneling function.
been waiting for this function for 10 years, no kidding.

[dnobori]

Sounds great. Try it.

[parkycai]

I get a message which says "This feature is not supported. It hasn't been implemented yet on the open-source version of SoftEther VPN" after I click OK in the "Edit the static routing table to push" window. The client does not receive the classless routes either.
I checked the VPN Server Information and found that the value of "Static Routing Table Pushing Function" is No, and the value of "Static Routing Table Pushing Function(Configurable)" is Yes.

I also cleared the Default Gateway Address in the SecureNAT Configuration and added a static route entry "192.168.10.0/255.255.255.0/192.168.102.1" in the push configuration window.

I'm using build 9432, running on Win2012 R2.

[mstenz]

interesting @ parkycai
I have tested also on server 2012R2 and for me it works very well without error messages.

[parkycai]

I installed the latest v4.06b9435 but still no luck. Here're some screen shots
[attachment=1]serverInfo.jpg[/attachment]
[attachment=0]classlessRoutes.jpg[/attachment]

I'm using Win 2012. Is there anyone having same issue with me?

[parkycai]

parkycai wrote:
> I installed the latest v4.06b9435 but still no luck. Here're some screen
> shots
> [attachment=1]serverInfo.jpg[/attachment]
> [attachment=0]classlessRoutes.jpg[/attachment]
>
> I'm using Win 2012 R2. Is there anyone having same issue with me?

BTW, how to activate "Lightweight Kernel-mode Ethernet Driver"?

***********Edit**************
Sorry, the OS is Win2012, not R2. I suppose it's not supported on 2012. On the other server running 2012 R2, it's working.
But the static-routing push function is still not working on 2012 R2.

[inten]

parkycai wrote:

> BTW, how to activate "Lightweight Kernel-mode Ethernet Driver"?

SoftEther VPN 4.05 Build 9422 (Beta) (February 17, 2014)
Added the NSDI 6.x Lightweight Helper Kernel-mode Module for the local-bridge function. This kernel-mode driver runs only on Windows 8.1 / Windows Server 2012 R2 or later.

[parkycai]

inten wrote:
> parkycai wrote:
>
> > BTW, how to activate "Lightweight Kernel-mode Ethernet Driver"?
>
> SoftEther VPN 4.05 Build 9422 (Beta) (February 17, 2014)
> Added the NSDI 6.x Lightweight Helper Kernel-mode Module for the local-bridge
> function. This kernel-mode driver runs only on Windows 8.1 / Windows Server 2012 R2
> or later.

thanks inten. I realized it's my mistake.

[parkycai]

here's my server config file. hope it helps to locate the problem

[samenlia]

parkycai wrote:
> I installed the latest v4.06b9435 but still no luck. Here're some screen
> shots
> [attachment=1]serverInfo.jpg[/attachment]
> [attachment=0]classlessRoutes.jpg[/attachment]
>
> I'm using Win 2012. Is there anyone having same issue with me

你在天朝吧。
=============================================
enterprises functions are currently disabled by default in Region of china。

while it is opensource， you can modify the code and rebuild it。

just look at src\Cedar\server.c function SiIsEnterpriseFunctionsRestrictedOnOpenSource()

=============================================
Please see this page http://www.softether.org/5-download/history
"On VPN Servers in People's Republic of China, the above five functions are currently disabled by default, under the orders from Beijing. Although Chinese users can enable these functions manually, Enterprise users in People's Republic of China are recommended to use these enterprise functions with PacketiX VPN Server 4.0 Chinese Edition."

[parkycai]

parkycai wrote:
> I installed the latest v4.06b9435 but still no luck. Here're some screen
> shots
> serverInfo.jpg
> classlessRoutes.jpg
>
> I'm using Win 2012. Is there anyone having same issue with me

你在天朝吧。
=============================================
enterprises functions are currently disabled by default in Region of china。

while it is opensource， you can modify the code and rebuild it。

just look at src\Cedar\server.c function SiIsEnterpriseFunctionsRestrictedOnOpenSource()

=============================================
Please see this page http://www.softether.org/5-download/history
"On VPN Servers in People's Republic of China, the above five functions are currently disabled by default, under the orders from Beijing. Although Chinese users can enable these functions manually, Enterprise users in People's Republic of China are recommended to use these enterprise functions with PacketiX VPN Server 4.0 Chinese Edition."

感谢，8年之后终于编了一个版本出来用了 囧