OSX NicCreate

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
mountainhike21
Posts: 4
Joined: Wed Oct 28, 2020 1:31 pm

OSX NicCreate

Post by mountainhike21 » Sun Nov 08, 2020 3:41 pm

Hi,

This fails on OSX with
VPN Client>NicCreate tap0
NicCreate command - Create New Virtual Network Adapter
Error occurred. (Error code: 31)
Installation of the Virtual Network Adapter device driver failed.

I see examining forums that you need OSX TAPTUN which needs to be notarised.

I have the notarised kexts and loaded them...

NicList command - Get List of Virtual Network Adapters
Item |Value
----------------------------+-----------------------------------
Virtual Network Adapter Name|tap0
Status |Enabled
MAC Address |5EB05C14E047
Version |Version 4.34 Build 9745 (English)
----------------------------+-----------------------------------
Virtual Network Adapter Name|VPN
Status |Enabled
MAC Address |5E8308D14DCE
Version |Version 4.34 Build 9745 (English)
The command completed successfully.

but they seem to be mostly unavailable I have created two but client does not connect...

any help appreciated

mountainhike21
Posts: 4
Joined: Wed Oct 28, 2020 1:31 pm

Re: OSX NicCreate

Post by mountainhike21 » Sun Nov 08, 2020 4:42 pm

I have restarted the Mac and now get this far...
Bt there is no connection...

bash-3.2# ./vpnclient start
The SoftEther VPN Client service has been started.
bash-3.2# ./vpncmd
vpncmd command - SoftEther VPN Command Line Management Utility
SoftEther VPN Command Line Management Utility (vpncmd command)
Version 4.34 Build 9745 (English)
Compiled 2020/04/05 23:39:56 by buildsan at crosswin
Copyright (c) SoftEther VPN Project. All Rights Reserved.

By using vpncmd program, the following can be achieved.

1. Management of VPN Server or VPN Bridge
2. Management of VPN Client
3. Use of VPN Tools (certificate creation and Network Traffic Speed Test Tool)

Select 1, 2 or 3: 2

Specify the host name or IP address of the computer that the destination VPN Client is operating on.
If nothing is input and Enter is pressed, connection will be made to localhost (this computer).
Hostname of IP Address of Destination: localhost

Connected to VPN Client "localhost".

VPN Client>AccountConnect
AccountConnect command - Start Connection to VPN Server using VPN Connection Setting
Name of VPN Connection Setting: m***

The command completed successfully.

VPN Client>AccountStatusGet
AccountStatusGet command - Get Current VPN Connection Setting Status
Name of VPN Connection Setting: m***

Item |Value
----------------------------------------+-------------------------
VPN Connection Setting Name |m***
Session Status |Retrying
Connection Started at |2020-11-08 (Sun) 16:33:09
First Session has been Established since|-
Number of Established Sessions |0 Times
The command completed successfully.

VPN Client>

yumiwang
Posts: 1
Joined: Tue Aug 02, 2022 12:18 pm

Re: OSX NicCreate

Post by yumiwang » Tue Aug 02, 2022 12:22 pm

got the same problem with u.

so have you found the solution yet?

Post Reply