GateWay-to-GateWay VPN between Cisco RV016\42\82 & SoftEther

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
Mictian
Posts: 4
Joined: Fri May 15, 2015 10:08 am

GateWay-to-GateWay VPN between Cisco RV016\42\82 & SoftEther

Post by Mictian » Fri May 15, 2015 10:30 am

Hi! Need help with configuration.
SoftEther VPN server installed on Windows server 2012 R2 runs on Hyper-V VM in data-center (via RRAS role). (Lan : 10.10.1.50\24)
In office I have a cisco RV082 DualWan VPN Router with statiс Wan IP & Lan 192.168.0.0\24 subnet.
Needless: GateWay-to-GateWay VPN connection between VM & office cisco rv082.
I enabled Mac Spoofing option on my Network card on VM in Hyper-V Manager.
In SoftEther I enabled "IPse/L2TP setting"->"Enable EtherIP/L2TPv3 over Ipsec Server Function" & set Ipsec Pre-Shared Key.
In My Cisco RV082 I configured "Gateway To Gateway" VPN with default options & same Pre-Shared Key as in SoftEither VPN server.
So now my connection is in status : CONNECTED.
Seems to be all fine, but I cant ping nothing betweeen my Networks.
need advice ! thank you!

thisjun
Posts: 2458
Joined: Mon Feb 24, 2014 11:03 am

Re: GateWay-to-GateWay VPN between Cisco RV016\42\82 & SoftE

Post by thisjun » Thu May 28, 2015 6:39 am

You connected between different IP segment.
Did you configure IP routing?

Mictian
Posts: 4
Joined: Fri May 15, 2015 10:08 am

Re: GateWay-to-GateWay VPN between Cisco RV016\42\82 & SoftE

Post by Mictian » Tue Jan 24, 2017 1:55 pm

thisjun wrote:
> You connected between different IP segment.
> Did you configure IP routing?

NO! Thanks to you I checket it out!

Post Reply